Installing The Projector Lens - Christie Roadie D4K40-RGB Installation And Setup Manual

The projector feet are removable and can be moved to the top of the projector to run in an
inverted orientation.
2. Once the required adjustment is made, using a wrench, tighten the lock nut against the
bottom of the projector.

Installing the projector lens

Only use lenses designed for D4K40-RGB projectors. Installing a lens not designed for D4K40-RGB,
results in a warning that the lens is not present.
1. Turn off the lasers.
2. Remove the lens caps from the lens.
The packaging tape is required to ensure safe shipment of the projection lens to restrain the
zoom ring from rotating during shipping.
3. Align the guides on the front cover and the lens marked by a red line.
D4K40-RGB Installation and Setup Guide
020-102961-06 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installation and setup
23