Transporting The Printer; Preparation Before Transporting - MUTOH ValueJet VJ-1638UH Operation Manual

6 Maintenance
6.7

Transporting the printer

This section describes how to tranport the printer.
CAUTION
• Move the printer maintaining a horizontal position.
• Do not slant the printer, prop it against a wall or turn it upside down.
There is a possibility that ink inside the printer may leak.
Moreover, normal operation after shifting (to these positions) cannot be guaranteed.
6.7.1

Preparation before transporting

(1) Preparation procedure
Follow the procedure below to transport the printer.
1. Performs Head cleaning using the cleaning liquid.
3.2.2 Turning the power OFF
2. Detach the cleaning wiper.
6.4.4 Replacing the cleaning wiper
3. Confirm that the printer is OFF.
3.2.2 Turning the power OFF
4. Dispose of waste fluid.
6.6 Disposal the waste fluids
5. When Media-feed table (optional) is installed, remove it from the printer.
3.5.3 Removing Media-feed table (optional)
6. Remove all the cables, such as the power cable.
7. Attach protection materials, and place the product inside the package box.
• When transporting the printer, it is necessary to pack in the same condition as purchased using
protective and packing materials to protect the printer from vibration and shocks.
NOTE
When transporting the printer, consult the MUTOH product dealer at your point of purchase.
334
VJ-1638UH OPERATION MANUAL
6.7 Transporting the printer