Test Expansion Interface Circuit Packs (S8700 Multi-Connect Only); Test Time Division Multiplexing Bus For Each Port Network - Avaya S8700 Installing Manual

206
Testing the Complete Configuration
Sample Test Results screen for test license
test license
Port
Test Expansion Interface Circuit Packs
(S8700 Multi-Connect only)
Check each Expansion Interface (EI) circuit pack in the media gateway.
Type test board UUCSS where UUCSS is the cabinet, carrier, and slot for an Expansion
1
Interface (EI) circuit pack in the media gateway, and press
NOTE:
Labels on the port network and carrier and on the strip under the circuit pack contain this
information.
2 Verify the screen displays test results similar to
Interface Board 2A01—S8700
3 If any result is FAIL, check the connections for the fiber optic link.
Repeat Steps 1 and 2 for each Expansion Interface circuit pack.
4
Sample Test Results for Expansion Interface Board 2A01—S8700 Multi-Connect
Test Time Division Multiplexing Bus for Each Port
Network
Check each TDM bus for each Port Network (PN) in the configuration.
Maintenance Name Alt. Name Test No. Result
LIC-ERR
Port Maintenance Name
02A01 EXP-INTF
02A01 EXP-INTF
02A01 EXP-INTF
02A01 EXP-INTF
02A01 EXP-INTF
02A01 EXP-INTF
October 2002
TEST RESULTS
1484 PASS
"Sample Test Results for Expansion
Multi-Connect". This example is for board 2a01.
TEST RESULTS
Alt. Name Test No. Result
237 PASS
238 PASS
240 PASS
241 PASS
244 PASS
316 PASS
Error Code
.
Enter
Error Code