Running The Avaya Installation Wizard; Verifying The Media Server Connection To The Customer Lan (If Provided) - Avaya S8700 Series Installing And Configuring

Chapter 4: Media server configuration

Running the Avaya Installation Wizard

1. With the Web browser open, type 192.11.13.6 and press Enter in the browser address
window to display the login page.
2. Log in as craft and use the initial craft password.
3. Click Launch Avaya Installation Wizard.
4. Follow the prompts. For more information use Help on each page.
!
CAUTION:
The license settings for the platform and the port network connectivity (PNC)
CAUTION:
attributes for the S8700-series Media Server can be complex. For more
information, see
Verifying the media server connection to the customer
LAN (if provided)
1. From the Maintenance Web Interface, under Diagnostics, click Ping.
2. Select Host Name Or IP Address and type the IP address of a computer on the network.
3. Click Execute Ping.
4. Verify that the ping was successful and indicates that the media server is connected to the
customer network.
5. If DNS is administered, type the host name of a computer on the network.
6. Click Execute Ping.
7. Verify that the ping was successful and indicates that DNS is working.
If possible, have a customer representative perform the following test from a computer on the
network:
1. Click Start > Run to open the Run dialog box.
2. Type command and click OK to open an MS-DOS command window.
3. Type ping serveripaddress and press Enter, where serveripaddress is the IP
address of the media server.
4. Verify that the ping was successful.
5. If DNS is administered, type ping servername and press Enter, where servername is
the host name of the media server.
6. Verify that the ping was successful.
34
Installing and Configuring the Avaya S8700-Series Media Server
PNC license settings for S8700-series Media Servers on page 9.
February 2007