Weight Checking; 8-8-1Set The High Limit Of Weight Checking; 8-8-2Set The Low Limit Of Weight; 8-8-3Enable / Disable The Weight Limit Function - Jadever JCAII User Manual

2.If you want to enable the function, press
If you want to disable the function, press
Note: When the HI & LO checking function is enabled, there will be an arrow pointing between
PERSET TARE and NET.

8-8 Weight checking

8-8-1Set the high limit of weight checking

1.Press under normal weighing mode. The display of the weight is blinking in the Weight
window while the arrow is pointing at HI in the Total Count window. (If not, press
Eg. 111pieces.
2. Use numeric key to input the high limit of weight you want.
3. Press to save and return.

8-8-2Set the low limit of weight

1. Press under normal weighing mode. The display of the weight is blinking in the Weight
window while the arrow is pointing at LO in the Total Count window. (If not, press
E.g. 111pieces.
2. Use numeric key to input the low limit of weight you want.
3. Press to save and return.

8-8-3Enable / Disable the weight limit function

1. Under normal weighing mode, press
blinking. (If not press
2. If you want to enable the function, press
If you want to disable the function, press
Note: When the HI & LO checking function is enabled, there will be an arrow pointing between
or
)
. The display in the Total Count window is
V03
)
)
JCAII 16