Upper & Lower Quantity Limit Checking; Entering A Known Unit Weight; Sample Counting & Acai - Jadever JCL User Manual

SMPL
4) Press key
5-2-1 Upper & Lower Quantity Limit Checking
1) Under the weighing mode, press and hold key
MC/CK
to initial upper/lower limits setting.
is blinking.
)
2) Use numeric keys to set the upper/lower Limits.
Key ● is to save upper limit value and advance
to the lower limit setting.
3) When setting is completed, again press key
checking mode.
4）To cancel checking action , long Press key
action is cancelled, with ―

5-2-2 Entering a Known Unit Weight

1) Under the weighing mode, use the numeric keys
together with key ●
and then press UWS
2）Put the article on the weighing pan , the
scale starts counting.
‖ points at ―UW‖ when entered unit weight is lower than 4/5 of scale division.
Note: "
5-2-3 Sample Counting & ACAI
1) Place samples onto the weighing pan (Or into a tared
container) and input the quantity with numeric keys.
SMPL
2) Press key
with Symbol ― ‖ Pointing at ―
Note:
●The larger the sample size, the more accurate unit weight.
●Symbol ― ‖ points at ―SMPL‖ when calculated unit weight is lower than 4/5 of scale
division or the quantity of sample is less than 10 pieces.
3) Remove the samples and put the load on, the scale begins to count.
CE
4) Press key to return to the weighing mode.
to save, and then press key
‖displays momentarily before the screen go back to zero mode.
to input unit weight value,
.
The unit weight is calculated,
.
‖.
ACAI
JCL
ZERO
to return to the weighing mode.
"
("
MC/CK
to save and return to weighing and
then press key ● twice .Checking
MC/CK
,
Vetek Weighing AB
7