Accumulation, Accumulation Display And Accumulation Clearing; Printer Initialization By The Indicator Operation - Jadever JWL-1.5K Manual

5. Remove the samples and put the load on, the scale calculates the amount of the load.
6. To go back to the normal weighing mode, remove the load and press key
the proper weighing unit.
Note:
1. The larger the sample size, the more accurate unit weight.
2. Symbol " " points at "UW" when calculated unit weight is lower than 4 / 5 of scale division.
7-5 Accumulation, Accumulation Display and Accumulation clear
Accumulation
Under the weighing mode, put the item on the weighing pan. Press key
"
appearance of
weight of the item.
Remove the item and the display goes back to zero before the next accumulation can register.
（The maximum is 99 pieces, display the latest 10 accumulation events in details ）
Accumulation Display
M-/SET
Press key
/MR TARE/
or
The number of weighments is indicated by Auxiliary display at the left bottom.
XX=Total accumulation； XX=certain accumulation
Accumulation Clear
To clear accumulation data (total accumulation data or one of the accumulation events), press
M-/SET
key while the data is displayed. To exit and return to normal weighing mode press
ZERO/ESC.
key

7-6 Printer initialization by the indicator operation

M-/SET
1. Press while powering on to enter parameter setting. Use key
to shift to P09
M-/SET
2. Press to enter the external device setting. Press
the printer model
3. Shift to certain printer model. Press
"UNSUP" means the printer is no need for initialization. Press
". " "
is displayed momentarily before the display reverts to the
to display the accumulation data
to check the total accumulation and each accumulation event in detail.
M-/SET
(II)
and the window will show "UNSUP" or "INIT?"
JWL
UNIT
M+/SAVE
/MR
or
/MR TARE/
or
ZERO/ESC
to return.
to select
at the
TARE/
to choose
12