Accumulation, Accumulation Display And Accumulation Clearing; Unit Setting Menu - Jadever 1.5K User Manual

500 、 1000( pieces) .
4) Put the corresponding samples on the weighing pan, and then press Put the corresponding samples on the weighing pan, and then press key
is displayed momentarily before the display reverts to the sample size. is displayed momentarily before the display reverts to the sample size.
→
5 ） Remove the samples and put the load on, the scale begins to count. Remove the samples and put the load on, the scale begins to count.
Note:
1. The larger the sample size, the more accurate unit The larger the sample size, the more accurate unit weight.
2. Symbol " " points at "UW" when calculated unit weight is lower than 4/5 of scale Symbol " " points at "UW" when calculated unit weight is lower than 4/5 of scale Symbol " " points at "UW" when calculated unit weight is lower than 4/5 of scale division.
Accumulation, Accumulation Display and Accumulation

Accumulation, Accumulation Display and Accumulation Clearing

1) Under the weighing mode, put the item on the weighing pan. Press key Under the weighing mode, put the item on the weighing pan. Press key Under the weighing mode, put the item on the weighing pan. Press key
appearance of " ".
weight of the items.
2) Remove the item and the display goes back to zero before the next accumulation Remove the item and the display goes back to zero before the next accumulation can Remove the item and the display goes back to zero before the next accumulation
register.
Accumulation Display
MR
Press key to display total accumulation data and each accumulation event in detail. to display total accumulation data and each accumulation event in detail. to display total accumulation data and each accumulation event in detail.
The number of weighments is indicated by Auxiliary display at the Lower Left
Accumulation Clearing
To clear accumulation data, press key To clear accumulation data, press key
return to normal weighing mode press key return to normal weighing mode press key

Unit setting menu

1) How to enter Unit setting menu?
Method 1: Press and hold key
Method 2: Long press key
is displayed momentarily before the display reverts to setting item is displayed momentarily before the display reverts to setting item p00.
" "
" " is displayed momentarily before the display reverts is displayed momentarily before the display reverts to the
→
（ The maximum is 20 The maximum is 20 pieces.)
ents is indicated by Auxiliary display at the Lower Left ents is indicated by Auxiliary display at the Lower Left corner.
M-
while the total weight is displayed. To exit and while the total weight is displayed. To exit and
ZERO/ESC
menu?
UNIT/LO UNIT/LO
while powering on the scale.
MODE MODE
for 3 seconds under normal weighing mode. for 3 seconds under normal weighing mode.
Vetek Weighing AB Vetek
G/N G/N
.
p00.
.
" "
M+
at the