Object, Modification Analogue Outputs - Festo CPX-FB11 Manual

A. Technical appendix
A.3.8 Object, modification analogue outputs
Attr. Access Description
no.
100 Get/set Force mode of the relevant channel
101 Get/set Force state of the relevant channel
102 Get/set Fault mode of the relevant channel
103 Get/set Fault state of the relevant channel
104 Get/set Idle mode of the relevant channel
105 Get/set Idle state of the relevant channel
1)
Identical with the distribution of the data block of the analogue output data. The value is congru
ent with the value of the analogue output channel.
Festo P.BE−CPX−FB11−EN en 0306a
Object class: 110
Instances: 1 ... 32
The Force, Fail safe and Idle parameters for the analogue out
puts are administered in this object. The first analogue out
put (channel 0) is administered in instance 1. The second
analogue output (channel 1) in instance 2 etc.
The relevant mode for the analogue output of this instance is
enabled or blocked in attributes 100, 102 and 104. This en
able function is subordinate to the system function which
affects all channels (placed in System object 114, attributes
121, 122 and 123).
Information on the assignment can be found in section A.3.5
and section B.2.2.
1)
1)
Type
USINT
1)
INT
USINT
INT
USINT
INT
Function no.
A−19