Festo CPX-FB11 Manual page 116

A. Technical appendix
Attr. Access Description
no.
106 Get Information 3
(Reserved)
107 Get/set Monitoring the CPX module (module−related
parameter 0)
For each module the monitoring of the possible
faults can be activated or deactivated
(suppressed) independently of each other.
See also Tab. B/23, Tab. B/33 and Tab. B/40
Bit 0:
Bit 1:
Bit 2:
Bit 3:
Bit 4:
Bit 5:
Bit 6:
Bit 7:
1: Active (presetting)
0: Inactive
108 Get/set Reaction after short circuit/overload
(module−related parameter 1)
See also Tab. B/24 and Tab. B/41
Bit 0:
Bit 1:
Bit 3
0: V
1: V
109 Get/set Input debouncing time (value range 0 ... 3)
Description see Tab. B/25
0: 0.1 ms
1: 3 ms (typical presetting)
2: 10 ms
3: 20 ms
A−10
Monitoring short circuit/overload
in the sensor supply
Monitoring short circuit/overload at the
outputs
Monitoring V
OUT/VAL
outputs/valves)
Monitoring short circuit at the valves
Reserved
Reserved
Reserved
Monitoring parameterisation faults
(internal faults)
Monitoring short circuit/overload in the
sensor supply
Monitoring short circuit/overload at the
outputs
Reaction after short circuit/overload at
analogue output
/V remains switched off
SEN OUT
/V remains switched off
SEN OUT
(undervoltage at
Type Function no.
USINT 2008 + m * 4 + 2
(bit 0 ... 7)
BYTE 4828 + m * 64 + 0
(bit 0 ... 7)
BYTE 4828 + m * 64 + 1
(bit 0 ... 1)
USINT 4828 + m * 64 + 1
(bit 4, 5)
Festo P.BE−CPX−FB11−EN en 0306a