Festo CPX-FB11 Manual page 137

A. Technical appendix
Attr. Access Name
no.
107 Get/set Fault end filter
Description see Tab. B/68
0: Register running faults (end of fault)
1: Do not register running faults (end of fault)
108 Get/set Fault number filter
Description see Tab. B/69
FN = fault number
0: Fault number filter inactive (presetting)
1: Register only defined FN
2: Do not register defined FN
3: Reserved
109 Get/set Module/channel filter
With this diagnostic memory filter, the registering
of faults of other modules or channels can be sup
pressed in order that faults in a particular module
or channel can be analysed.
FN = fault number
0: Module/channel filter inactive (presetting)
1: Register only the FN of a module
2: Register only the FN of a channel
3: Reserved
110 Get/set Module number
Module number for the diagnostic memory filter
111 Get/set Channel number
Channel number for the diagnostic memory filter
112 Get/set Fault number
Fault number for the diagnostic memory filter
Festo P.BE−CPX−FB11−EN en 0306a
(filter inactive, presetting)
(filter active)
Type Function no.
USINT 3484
(bit 3)
USINT 3484
(bit 4, 5)
USINT 3484
(bit 6, 7)
USINT 3485
(bit 0 ... 7)
USINT 3486
(bit 0 ... 7)
USINT 3487
(bit 0 ... 7)
A−31