Pepperl+Fuchs HID2891 Manual page 22

Frequency Converter HiD2891
6.2.3 Adjustment of the communication DTM
TM
In a PACTware
DTM P2P RS232 FDT only. Please refer to the "PACTware
manual to read how to create and edit a project.
If such a driver is not available in your project yet, use the device catalog to add it to the project (see
TM
"PACTware Process Automation Configuration Tool" manual).
The only parameters of the communication DTM are the PC interfaces used and the number of repeat
attempts.

Setting the parameters

Use the mouse to double-click on communication DTM P2P RS232 FDT in the project
window.
The Parameter window is opened.

Select the requested communication port from the list of communication ports.

Select the number of attempts from the list of repeat attempts.
Here the number of attempts is selected which the communication DTM carries out to
establish a connection to the connected device.

Close the Parameter window using the button .
20
project the frequency converter HiD2891 can be addressed by communication
TM
Process Automation Configuration Tool"