Pepperl+Fuchs HID2891 Manual page 23

Frequency Converter HiD2891
In order to add a device to a project, please chose communication DTM P2P RS232 FDT of the
project. Add the device to the device catalog. For more details on these working steps, please refer to
TM
the "PACTware Process Automation Configuration Tool" manual.
The description in the following chapters proceeds on the assumption that a device has been chosen
in the project.
The following submenus can be run in the Device Menu:
Device >
>
>
>
>
>
>
>
>

Starting and stopping communication

Start the communication between PACTware
Device > Connect.

Stop the communication between PACTware
Device > Disconnect.
Connect
Disconnect
Load from device
Store to device
Parameter (section 6.3)
Measured value (section 6.2.4)
Simulation (section 6.2.5)
Diagnostics (section 6.2.6)
Additional functions > Service (section 6.2.7)
TM
and the device by running
TM
and the device by running
21