Pepperl+Fuchs HID2891 Manual page 21

Frequency Converter HiD2891
The cross-device properties of the software are described in the "PACTware
Configuration Tool" manual. For the free manual written in several languages, please access our
website at www.pepperl-fuchs.com/pa under Software > PACTware.
Below please find the device-specific settings for frequency converter HiD2891 only.
6.2.2 Connecting the device

Connect the PC to the device

Mount the device on the termination board (see section 5.1).

Connect the device to the power supply.

Use the adapter cable K-ADP1 to connect the PC to
the device.
This cable can be ordered as an accessory.
Please use the adapter cable version with a plug
length of 18 mm (part number 071923).

Insert the cable jack into the RS 232 interface on the front of the device and the 9-pin
or 25-pin connector to a free serial interface on the PC.

Start the PACTware
Configuration Tool" manual.
TM
as described in the "PACTware
TM
Process Automation
TM
Process Automation
19