Table of Contents
Advertisement
General
Appliance con-
cept
Areas of utilisa-
The FK 6000 cooling unit is a "use-anywhere" appliance that is suitable for many different
tion
welding processes:
-
-
-
-
-
-
Information about
the coolant
-
-
-
-
Custom versions
FK 6000 Pipe
The FK 6000 Pipe cooling unit is a special version of the FK 6000 that is designed for de-
ployment under extreme climatic conditions. The FK 6000 Pipe comes with the following
additional equipment:
-
-
-
-
-
Welding at high ambient temperatures
High welding power from one power source
Operating power sources in parallel (power sharing)
TimeTwin Digital
Plasma welding
TIG welding at the high end of the power range
CAUTION! Risk of damage.
Only use coolant available from the manufacturer.
Do not mix different coolants.
When changing the coolant, ensure to change all of it.
When switching from ethanol-based coolant to FCL 10 coolant, Change Kit FCL10
must be used and the instructions provided must be followed.
Special coolant pump and delivery hoses for the low-temperature range
Special coolant with improved thermal characteristics for low-temperature environ-
ments
Coolant watchdog option with connector for external signal evaluation by the robot
control
Water filter
Auto-transformer
The FK 6000 cooling unit is a "use-anywhe-
re" cooling unit with suitability for all welding
processes at the high end of the power ran-
ge. The FK 6000 can be operated indepen-
dently of a power source. When deployed
directly next to the wirefeeder, there is no
need for a long interconnecting hosepack.
19
Advertisement
Table of Contents
