Table of Contents
Advertisement
Care, maintenance and disposal
General remarks
Under normal operating conditions the cooling unit requires only a minimum of care and
maintenance. However, it is indispensable to follow some important points to ensure the
operationality of the welding machine for many years.
Safety
IMPORTANT! The coolant must not be disposed of via the sewerage!
Symbols for care
and maintenance
of the cooling unit
Every start-up
-
-
30
WARNING! An electric shock can be fatal. Before opening up the machine,
switch it off, unplug it from the mains and put up a clearly legible and easy-to-un-
derstand warning sign to stop anybody inadvertently switching the machine back
on again. The casing screws are a suitable protective conductor connection for
grounding the casing. The screws must not be replaced by other screws without
reliable protective conductor connection.
CAUTION! Danger of scalding from hot coolant fluid. Do not inspect the coolant
connection points until the coolant has been allowed to cool.
NOTE! For refilling the cooling unit only use coolant of the manufacturer.
(1)
(2)
(4)
Check welding torch, interconnection cable assembly and bondings for damage
Check whether the allround distance of 0.5 m (1.6 ft.) is kept to ensure that the cooling
air can easily flow and escape.
NOTE! Furthermore, air inlets and outlets must in no case be covered, not even
covered partly.
CAUTION! Danger of scalding from hot coolant fluid. Do not inspect the coolant
connection points until the coolant has been allowed to cool.
(1)
Check coolant level
(3)
(2)
Change the coolant
(3)
Gas purge the cooler
(4)
Read operating instructions
The relevant maintenance intervals and
work are described in detail in the following
pages.
Advertisement
Table of Contents
