Changing The Welding Torch - Fronius FK 6000 Operating Instructions And Spare Parts List

2
3
Changing the
welding torch
Switch mains switch of the power source(s) in position "I" - the cooling pump starts op-
eration.
Check coolant flow until proper flow is ensured. If necessary, deairate coolant circula-
tion.
NOTE! During welding check coolant flow at regular intervals - a proper return
flow must be visible in the filler neck.
CAUTION! Excess pressure will damage the cooling unit. Before blowing out the
welding torch with compressed air, undo the screw cap on the fill nozzle.
29