Projector Parts - Interface Ports - Epson EB-810E User Manual

Projector Parts and Functions
Name Function
Rear adjustable foot When setup on a surface such as a desk, extend the foot
G
to adjust the position of the image.
VESA mount fixing Use these points to attach the commercially available
H
points (four points) mount compatible with the VESA Mounting Interface
Standard (100 × 200 mm) when installing the projector
on a wall or suspending the projector from a ceiling.
g g Related Links
• "Air Filter and Vent Maintenance"
• "Installing a Security Cable" p.128

Projector Parts - Interface Ports

Caution
Remove all feet when you install the projector
on a wall or suspend it from a ceiling.
p.219
Name Function
USB-A port (USB- Use to connect a USB memory device or digital camera
A1) for projecting movies or images using the PC Free
feature or in Content Playback mode.
Use to connect the optional document camera.
Use to connect a USB memory device to save error and
operation log files.
Use to connect the wireless LAN module.
a
USB-B port Use to connect a USB cable to the computer to project
B
computer images.
HDBaseT port Use to connect a LAN cable to the HDBaseT
C
Transmitter. You can use a network cable up to 100 m
(RJ-45)
in length. To ensure proper data transmission, use a
Category 5e STP cable or better. However, operation is
not guaranteed for all input/output devices and
environments.
This port is compatible with HDCP2.3.
Check the following settings:
• To enable communication from the Ethernet and
serial ports on the transmitter, select On as the
Control Communications setting in the projector's
Signal I/O menu.
s Signal I/O > HDBaseT > Control
Communications
• If you have connected an Extron XTP transmitter or
switcher, select On as the Extron XTP setting in the
projector's Signal I/O menu.
s Signal I/O > HDBaseT > Extron XTP
17
In this guide, USB-A1 and USB-A2
ports are collectively referred to as
the USB-A port.