Menu Structure - IKA C 7000 Operating Instructions Manual

3DJH 
5.
6. $OSKDQXPHULF EXWWRQV DQG /('V: the alpha-numeric keys are each allotted 3
7. GHO EXWWRQ: operating the GHO button moves the cursor one character to the left,
8.
9.
10.
 0HQX VWUXFWXUH
The menu structure of the C 7000 calorimeter comprises three main menus,
PHQX , PHQX , and PHQX , which have the following functions:
PHQX 
PHQX 
PHQX 
Each main menu has two sub-menus. The three levels of the menu structure are
shown in the diagram below:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
9
EXWWRQ ZLWK JUHHQ /(': the
from the calorimeter. Error messages, various signals from the instrument, and
results that are displayed after a measurement all have to be acknowledged.
The green LED blinks when a test has been completed. After the
been pressed, the display shows PHQX  again.
different characters, so that letters figures and other characters can be entered.
Characters that can be entered are the figures  to , the symbols "
and the letters $ to =, with the exception of - and 4.
The LEDs, DOSKD, QXP and DOSKD, arranged above the alpha-numeric keys,
show which character set is currently active. The required character set can
always be selected, using function buttons I, I and I, when the system
permits an alpha-numeric entry.
Example of an alpha-numeric key:
When the DOSKD LED is illuminated, pressing this key will write the letter $ in the
LCD-display. When the QXP LED is illuminated, then  appears in the display,
and when the DOSKD LED is illuminated, then 1 appears in the display.
 
The keys " " and " " have special meanings. The symbol "
marker for any desired string of characters, and "
desired character.
erasing the character as it moves. In this way, incorrect entries can be erased
one character at a time. For this purpose, the cursor must be positioned DIWHU
the character that is to be erased.
EXWWRQ DQG EXWWRQ: within a particular menu, pressing the
moves to the next menu level, and pressing the
ous menu level.
EXWWRQ DQG EXWWRQ: pressing the
acter to the right in the LCD-display without erasing a character, and pressing
the button moves the cursor one character to the left in the LCD-display also
without erasing.
EXWWRQ: the
↵ ↵
button confirms an entry which has been made using the alpha-
numeric keys or the function keys, and concludes the current entry operation.
Entry of pre- and post-test parameters, output and erasure of tests.
PHQX  always appears when the instrument is switched on.
Manual editing of tests and calibration of the calorimeter.
Initialization of hardware and software, and setting the ignition time.
9
is used to acknowledge various messages

A
button moves the cursor one char-
®
IKA -WERKE C 7000
 &RPPLVVLRQLQJ
9
button has

" and "
N

" serves as place

" as place marker for any
button
button changes to the previ-
Ver. 07 09.07

",