IKA C 7000 Operating Instructions Manual page 33

3DJH 
 &RQILJXUDWLRQ RI WKH &  &DORULPHWHU
When it is first switched on, the fundamental settings of the calorimeter should be
configured. This applies to all parameters that can be set in the sub-menus of
PHQX , as follows:
•
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Sub-menu +',QLW
H[W 3&
For communication between the calorimeter and an external PC to operate cor-
rectly, the interface parameters and the software protocols of the two units must
be consistent. For the C 7000 calorimeter, the following interface parameters
are available in sub-menu H[W 3& (the preset values are in bold type; they are
the interface parameters when using the IKA
1200, , 4800, 9600 bits/s data transmission rate
EDXGUDWH
GDWDELWV 5, 6, 7,  bit length of data word
, 2 stop bits
VWRSELWV
odd, even, GLVDEOH
SDULW\
EDODQFH
For communication between the calorimeter and an electronic balance to oper-
ate correctly, the interface parameters and the software protocols of the two
units must be consistent. The parameters for the balance must be taken from
the balance manual.
For the C 7000 calorimeter, the sub-menu EDODQFH contains the following inter-
face parameters (the preset values are in bold type):
EDXGUDWH 1200, , 4800, 9600 bits/s data transmission rate
GDWDELWV 5, 6, , 8 bit length of data word
VWRSELWV , 2 stop bits
SDULW\ RGG, even, disable
EDODQ (type) 6DUWRULXV $&  DQG %3 UDQJH,
Mettler balance with RS 232C,
Chyo balance
It is only possible to connect another balance if it is compatible with one of the
above models.
GDWH
The date for the calorimeter must be entered in the form (ddmmyy). Permissible
values are:
GG
day, all dates with two figures from 01 to 31
PP
month, all months with two figures from 01 to 12
\\
year, all years with two figures from 00 to 99)
If an incorrect entry is made, the message LQFRUUHFW HQWU\ appears. Entries may
only be made as numbers.
WLPH
The time must be entered in the form (hhmmss). Permissible
values are:
KK
hours, values with two figures from 00 to 23
PP
minutes, values with two figures from 00 to 59
VV
seconds, values with two figures from 00 to 59
If an incorrect entry is made, the message LQFRUUHFW HQWU\ appears.
software &DO:LQ):
®
®
IKA -WERKE C 7000
 &RPPLVVLRQLQJ
Ver. 07 09.07