IKA C 7000 Operating Instructions Manual page 56

 (YDOXDWLRQ RI &DORULILF 9DOXH 7HVWV
When a calorific value test has been completed, you can proceed to evaluating the
results. Section 8.1 explains how stored tests can be listed in a table, how you out-
put or erase test results, and how you can list information about free memory for
storing new tests. You will find these functions in the sub-menu RXWSXW. The test re-
sults are dependent on the post-test parameters; their meaning and how to enter
them are described in Section 8.2. Section 8.3 deals with the possibility of test
simulation.
 2XWSXW DQG WUHDWPHQW RI WHVW GDWD
Before stored data can be issued and processed, the user must first state which
tests are to be called up from memory. After the appropriate menu has been acti-
vated, you will be requested, in succession, to enter selection criteria for the date,
sample code and sample status.
A particular test is called up by the user entering appropriate values for the date,
sample code and sample status. With the aid of the two place markers "
is, however, also possible to select several tests at the same time. The symbol "
serves as a place marker for any desired string of characters, while the "
functions as place marker for any desired single character. Both symbols can be
used in the date and sample code fields, whereas sample status only considers one
of four fixed, preset values.
When the symbol "
defined in more detail, all tests in the memory meet this criterion.
On the other hand, the symbol "
can, however, be used several times.
The sample status can have the following values:
DOO
•
all stored tests are selected, independent of sample status
DIWHUSDU
•
selects only tests for which post-test parameters have been entered (see
Section 8.2)
HGLW
•
selects only edited tests
SULQWHG
•
selects only tests that have already been printed.
The individual data for date, sample code and sample status are logically linked by
an AND relationship. This means that only tests that fulfil all three specified criteria
will be selected.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

" is entered in one of the two fields, the selection criterion is not

" stands for just one character within a string. It
®
IKA -WERKE C 7000
3DJH 
 
" and " " it

"

" symbol
Ver. 07 09.07