• Wear your personal protective equipment in accordance with the Contents hazard category of the medium to be processed. Otherwise there is a risk of: Page - splashing liquids Declaration of conformity - projectile parts Safety instructions - release any toxic or combustible gases. Unpack •...
® extractor hood. Please contact IKA if you have any questions. • Do not operate the appliance in explosive atmospheres, with hazardous substances or under water. • Please observe the operating instructions for any accessories used. • The socket for the mains cord must be easily accessible.
Functions see mode B. Warranty The settings are preset and not changeable. For changing the settings select the operating mode A or B. In accordance with IKA ® warranty conditions, the warranty period is Changing the operating mode 24 months. For claims under the warranty please contact your local The operating modes can only be selected successively! dealer.
indicate HOT (D) on the display with over 50 °C on • Commissioning the heating plate (in the agitating and stand-by-mode) Commis- Put device switch (A) in the OFF position sioning Plug in (G) mains cable Once connected to the power supply the device is in Error codes “stand-by”...
(SW17). - Manufacturing number, see type plate • Use bossheads to assemble accessory parts or - Item number and designation of the spare part, see www.ika.com accessory devices. Repair Please only send devices in for repair that have been cleaned and are free of materials which might present health hazards.
Technical data Temperature control in the medium with PT 1000 temperature sensor Minimum depth of immersion sensor Operation at a terrestrial altitude max. 2000 Dimensions (W x D x H) HS 4 150 x 260 x 105 Measuring accuracy ± 0,2 HS 7 220 x 330 x 105 + sensor tolerance...
Need help?
Do you have a question about the C-MAG HS 4 digital and is the answer not in the manual?
Questions and answers