C Prox.pad Led Indicators/Sounder Operations - Standalone Mode; Table 5: Prox.pad Led Indicators/Sounder Operations - Standalone Mode - IEI Technology prox.pad Installation & Programming Manual

2.7.1.c prox.pad LED Indicators/Sounder Operations – Standalone Mode
The table below describes the various LED and Sounder indications used in the prox.pad while operating in standalone mode.
Table 5: prox.pad LED Indicators/Sounder Operations – Standalone Mode
LED/Sounder Visual/Audible Condition
Slow blink
Rapid blink
Yellow LED Steady
Very rapid blink
"Pulsing" rapid blink
Steady red
Steady green
Red drop out
Green with red blink
Bi-color LED Fast green flash
Quick double red/green flash
Alternating red/green
Solid green with red flicker
Red blink
Rapid red, yellow, green
All LED's
sequencing
Very quick beep (10 ms) with
yellow LED blink every second
Sounder
Short beep (100 ms) every 2
(system)
seconds
Sounder 1/2 sec on, 1/2 sec off
Sounder (after
3 rapid beeps after
PIN)
3 very rapid beeps
Sounder (after
card)
1 short beep
Document # 6055676, Rev 2.2, D4b
prox.pad Installation/Programming Manual
Description
Unit is in Program mode
Verify mode is active (checking that the last two values in
sequence match)
Program error; entry error lockout (no keypress feedback)
Memory (eeprom) erase is in progress (command 46)
Batch program of cards in progress (command 56); block
delete of users (command 58)
Lock is locked
Lock is energized (timed or latched)
Lock locked, user lockout is active; red LED drops out for
100 ms every second; a latched lock will override lockout
indicator
Lock latched and user lockout is active
IR dump in progress (user/log)
Prox card read correctly
Waiting for second PIN or "card and code" user
Lock toggle is unlocked and user lockout active
User lockout is active and lock locked; red LED drops out
for 100 ms every second; normal users cannot change
the state of the relay
Power on/reset
EEPROM read error during get system parameters; can
be turned off by running self-test
Propped door is active
Forced door is active
PIN not found
PIN not found, facility code/company ID mismatch and
access by facility mode enabled; incorrect card type
(option #20)
Valid card access
Page 37 of 86