Prox.pad Specifications; Table 1: Prox.pad Specifications - IEI Technology prox.pad Installation & Programming Manual

prox.pad Installation/Programming Manual
1.12

prox.pad Specifications

Electrical
Power Supply/Current Requirements
Wiring
Remote Antenna Cable (if installing in a
secured configuration)
Wiegand Interface Cable
Secured Series Front End Cable
Power Supply Cable
Door Lock Cable
Door Monitor Cable
REX Cable
Mechanical
Height
Width
Depth
Relay Outputs
Main Relay
Aux Relay
Monitor Inputs
Door Position Switch
Other Outputs
Infrared LED Output
Sounder
Bi-Color LED
Yellow LED
Compatible Proximity Cards (All HID cards up to 40 bits, including the following)
Specifications continued on next page.
Page 12 of 86

Table 1: prox.pad Specifications

10-15 VDC, linear filtered and regulated power supply; 100mA
[ALPHA 1294C (22AWG) 4-conductor, stranded and shielded]
[ALPHA 1295C (22AWG) 5-conductor, stranded and shielded]
[ALPHA 1295C (22AWG) 4-conductor, stranded and shielded]
18AWG - 22AWG 2-wire stranded (depends upon distance)
18AWG - 22AWG 2-wire stranded (depends upon distance)
18AWG - 22AWG 2-wire stranded (depends upon distance)
[ALPHA 2421C 18 AWG or ALPHA 1292C 22 AWG, 2-conductor,
stranded and shielded] (if using remote switch)
5.25 in (13.3 cm)
2.75 in (7 cm)
1.625 in (4.13 cm)
Form C (switches up to 2A)
Program for either timed (1-99 sec) or toggle
Form C (switches up to 1A)
One of three functions can be programmed: Alarm Shunt Relay,
Forced Door Relay, or Propped Door Relay
Normally Closed, Dry Contact
Output to optional Data Collection Device PDA Software
4000 Hz, defeatable
Red/Green
Prox Card II, IsoProx II, DuoProx II, ProxKey FOB
Document # 6055676, Rev 2.2, D4b