Ametek Amrel PLA Series Operation Manual page 40

input of the unit. Once RI is activated, it will turn off the dc output. In order to re -activate the unit, the
connection between common and RI pin needs to be open again, and it will have 3 seconds delay.
4. External programming port.
5. Connector, GPIB/IEEE-488.2.
6. Connector, DB9 for RS232.
7. Connector, RJ45 for Ethernet interface (LAN).
8. Connector, USB.
9. Chassis / Line ground lug screw.
10. AC power inlet with external fuse holder.
M470039-01 REV-F Page 39