V
in
MaxV
LowV
FIGURE 1.5 INPUT VOLTAGE/CURRENT/POWER RELATION DIAGRAM
The theory of the CP operation comes from the divider circu it built in the load. Because of the nonlinear characteristic of
the divider, the input voltage, input current, and power settin g will limit the C P mode of operation. The CP mode will not
allow the load to operate beyond the full range of the Constant Power setting.
M470039-01 REV-F
Maximum Current – Max A
Maximum Voltage – Max V
Maximum Power – Max KW
Low-Mid
Max A
I
in
Page 33