GE eBike II Series Service Manual page 93

• Saddle adjustment motor
- Check all possible positions by moving the saddle to the top and to
the bottom position.
- Return saddle to the middle position.
Expected result:
• Speed and Noise
- Check speed indication on LCD and additional speed indication for test subject.
- Check noise level of idling drive unit (e.g., for grinding noises or noise from the bearing).
Expected result:
• Units with NIBP module:
- Check cuff tubing and tubing connections, microfon connectors
- Check blood pressure measurement on test subject at rest
- Check blood pressure readings on LCD
Expected result:
• Start manual exercise test, change load (e.g. start 50 W, increase 25 W)
- Check load level and load indication
Expected result:
• If ergometer is remote controlled from ECG recorder or PC-ECG system:
- Check connecting cable
- Check load control via ECG recorder or PC ECG system
- Check remote start if applicable
Expected result:
2018112-069 Rev. F
saddle position changes to the expected positions
peed displayed on both displays and no noticeable noise
BP values are displayed and in proper range
Load changes as expected
Ergometer can be controlled by external unit
eBike II, eBike II L, eBike II EL
Pass/Fail
Pass/Fail
Pass/Fail
Pass/Fail
Pass/Fail
- 93 -