Bde - Bloodpressure Pcb; Pne - Bloodpressure Pneumatic Unit - GE eBike II Series Service Manual

Bde - B pCB
loodpressure
The BDE electronics is responsible for analysing the
microfone signals and controlling the valves and the
pump.
The input of the microphone (upper left in picture) is
galvanically separated.
A redundant surveillance system (2 nd pressure sensor)
continously monitores the actual cuff pressure and the
pump time.
By use of the two RJ-45 jacks the BDE board is connected
to the eBike II bus system.
pne - B p
loodpressure neuMatIC unIt
Depending on the actual ergometer type, the pneumatic
components (pump, valves, compensating container) are
arranged on different positions.
Electronic cabling and connection of the pressure tubes is
nevertheless identical.
2018112-069 Rev. F
bde- b
e
rgoMeter bloodpreSSure unit
eBike II, eBike II L, eBike II EL
loodpreSSure MeaSureMent board
- 37 -