e
xCHange Motor Control unIt wItH
B
loCk dIagraM Motor Control unIt
remote control
e
xCHangIng tHe Motor Control unIt
Troubleshooting
•
Before replacing the motor control unit make sure
that the motor is actually defective.
•
For this check, use a new hand switch for eBike EL
and test the motorfunctions.
•
If the control unit does not work, it is out of order
and must be replaced.
•
If it works, the hand switch is defective.
- 126 -
sCu
motor control
1
SUB-D
connector
2
3
on/off
switch
eBike II, eBike II L, eBike II EL
saddle motor
1
motor left side tilting
2
motor longitudinal tilting
3
for connector identification:
see „wiring diagrams"
power cord
2018112-069 Rev. F