GE eBike II Series Service Manual page 203

M
aIntenanCe
C
HeCks Before eaCH use
Before each use, visually inspect the device for signs of
damage.
If you detect damages or impaired functions which may
result in a hazard to the patient or the operator, the device
must be repaired before it can be used again.
t s I
eCHnICal afety nspeCtIons and
t I
eCHnICal nspeCtIons of tHe
The technical safety inspections and the inspections of
the measuring system must be completed every two years
according to the rules of the art by a Service Engineer
authorized by ergoline.
Similarly, the automatic sphygmomanometer in the control
terminal must be checked and calibrated by an authorized
specialist every two years to fulfill legal requirements.
The date of the next inspection is indicated on the
inspection sticker attached next to the type plate on the
ergometer.
d
Isposal
Do not dispose the product described in this Operator
Manual as unsorted municipal waste. It must be collected
separately.
Please contact the authorized manufacturer ergoline GmbH
to obtain information concerning the decommissioning of
your equipment. There is no proper waste management,
proper disposal is documented by ergoline GmbH.
Consult operating instructions.
2018112-069 Rev. F
M s
easurIng ysteM
eBike II, eBike II L, eBike II EL - 203 -