GE eBike II Series Service Manual page 75

The service menu appears
Select „„Software update" with the arrow keys and confirm
with ENTER (or SELECT).
The actually installed software version is displayed.
Press the right key to display the installed software
versions of the different electronic modules.
Grp: name of the module
Ap-SW: actually installed version
(if =0 no connection to module)
X: XCUT of software-version (always 0)
S-No.: serial number of PCB, if electronically available)
Press the right key again to display the installed bootloader
versions of the different electronic modules.
Grp: name of the module
Op-SW: required software version
(has to be equal to the Ap-SW in previous display)
BootLo: actual bootloader version of PCB
2018112-069 Rev. F
Service Menu
NIBP Parameter
Software update
Dynamic load calib.
PC mode
Saddle calibration
S
ervice Menu control terMinal
Software Update
Grp
ZME
LRE
Grp:
ZME
LRE
eBike II, eBike II L, eBike II EL
ENTER
FW 3.0
UPDATE
Ap-SW X
2.5 0
3.2 0
UPDATE
Op-SW:
2.5
3.2
UPDATE
S-No.
910
117
Bootlo:
0.3
0.2
- 75 -