Table of Contents
Advertisement
B
II l
e
Ike
p
M
reventIve
aIntenanCe
•
eBike II L is a protection class I device (with connection to protective ground)
•
Suitable common ground terminal:
screw head of the protective earth connection between swivelling section and ergometer base
•
preventive maintenance has to be performed every 2 years
f
Inal CHeCkout proCedure
•
Visually inspect the device
- Inspect coat of lacquer
- Inspect cables/power cord
- Inspect bellows on steering column and saddle
- Inspect footboard for stability
- Inspect cuff, tubing and tubing connection
- Inspect couch adjustment motor for damage
- Check the setup for stability, lock castor brakes, if required.
Expected result:
•
Check rests, cranks, pedals and Velcro strips
- Check that all clamping levers and star grips are firmly seated
- Check that cranks, pedals, Velcro strips and pedal shoes are properly fixed.
- Inspect leg rests and their attachment, if leg rests are installed.
- Inspect head and arm rests as well as handgrips.
- Grease the threads of the clamping levers (every 6 months, depending on application purpose).
(Use of an universal high-performance lubricant such as OKS 470 is recommended)
Expected result:
•
Power on
- Using the power cord, connect the device to the power line and
turn it on with the power switch.
- Wait for self-test to end:
Check LCD, e.g. for error messages.
- Check in the software if the firmware version is OK.
Expected result:
•
Couch adjustment motor
- Set motor to both stop positions
- Change couch position from horizontal (0°) to semi-recumbent (45°)
and then back to thehorizontal position (0°)
Expected result:
- 92 -
/ f
unCtIonal test
No damage, instability or wear detected
All threads properly greased, cranks, rests and pedals OK
Device powers on without errors and FW is OK
Couch position changes to the expected positions
eBike II, eBike II L, eBike II EL
Hint
Pass/Fail
Pass/Fail
Pass/Fail
Pass/Fail
2018112-069 Rev. F
Advertisement
Table of Contents
