Figure 49. Service laptop to RSA connection
3. On the laptop, click Start → Control Panel.
4. Double-click Network Connections.
5. Right-click Local Area Connection → Properties. See Figure 50.
Figure 50. Local Area Connection Properties
6. From the list, select Internet Protocol (TCP/IP), then click Properties.
7. Select Use the following IP address.
8. In the IP Address field, type: 172.31.1.14 (or 192.168.70.33 if the RSA is a
new FRU), and in the Subnet mask field, type: 255.255.255.0.
9. Click OK and then click Close to exit the Local Area Connections Properties
window.
10. On the TSSC or service laptop, open a browser window.
Appendix D. Making a server connection through the System Management Module (IMM)
157