Summary of Contents for IBM Network Station E Series
Page 1
® ™ Network Station Setting Up IBM Network Station Hardware - Type 8364 (Models Exx, Txx) July 1999 To view or print the latest update, go to http://www.ibm.com/nc/pubs SA41-0046-01...
Page 3
® ™ Network Station Setting Up IBM Network Station Hardware - Type 8364 (Models Exx, Txx) July 1999 To view or print the latest update, go to http://www.ibm.com/nc/pubs SA41-0046-01...
Handling static-sensitive devices Production Status Limitation of Liability . IBM Statement of Warranty Worldwide About Setting Up IBM Network Station except Canada, Puerto Rico, Turkey, United Hardware - Type 8364 (Models Exx and States (Part 1 – General Terms) .
Safety and environmental notices Safety notices contain information that is related to using the IBM Network Station thin client in a safe manner. The notices can be in the form of a danger, warning, or caution notice. Danger notices The following danger notices call attention to situations that are potentially lethal or extremely hazardous.
DANGER To prevent a possible electrical shock, disconnect the power cord from the electrical outlet before opening the IBM Network Station logic unit. (RSFTD215) DANGER To reduce the risk of electrical shock use only AC power sources approved by IBM. (RSFTD216)
Page 10
If you are mailing comments from a country other than the United States, you can give the form to the local IBM branch office or IBM representative for postage-paid mailing. v If you prefer to send comments by FAX, use either of the following telephone numbers: –...
Chapter 1. Setting up your hardware Unpacking your hardware Unpack your hardware. Contact your reseller, or IBM, if you do not have these standard parts: 1 Network Station 2 Base 3 Mouse 4 Keyboard 5 Power cable Selecting the voltage for your location: Attention: You may damage the Network Station if you do not select the correct voltage.
Page 12
Refer to the server software information to verify the correct selection for your network. Note: If your Network Station is unable to receive the operating system code from the server, contact your network administrator. IBM Network Station...
Page 14
4. Install PCI slot covers over any empty slots. 5. Slide the plate E down until the tabs D secure the PCI slot covers F firmly into place. 6. Tighten the thumb screw C , 7. See “Reassembling the Network Station” on page 3. IBM Network Station...
Page 15
Exchanging the memory Complete the procedure, “Removing the logic unit to install parts” on page 3 before performing the following Dual Inline Memory Module (DIMM) procedures. 1. To remove a DIMM from the logic unit, press the two tabs B located at each end of the DIMM A out and down.
__ 3. If you are instructed to replace a Network Station part, find the part in Table 2 on page 11, and order the part from IBM or your reseller. __ 4. If your Network Station is under warranty or a maintenance contract, contact IBM Service to obtain parts.
Page 18
Perform the steps below to ensure that any beep sequences are not being caused by an easily avoidable problem. Refer to IBM Network Station Service Information - Type 8364 (Models Exx, and Txx) (SY44-0073), or contact your service representative if these steps do not resolve the problem.
Page 19
Try to determine the cause and solution of the problem from the description in the message text. If you continue to have problems, refer to IBM Network Station Service Information - Type 8364 (Models Exx, and Txx) (SY44-0073), or contact your network administrator, reseller, or IBM.
IBM will provide warranty service without charge for parts during the warranty period on an exchange basis only. If you need a replacement logic unit, IBM or your reseller will give you instructions for returning your current logic unit to IBM.
Page 22
Argentina, Australia, New Zealand 230V 13F9940 Abu Dhabi, Austria, Belgium, Bulgaria, 230V 13F9979 Botswana, Egypt, Finland, France, Germany, Greece, Iceland, Indonesia, Korea (South), Lebanon, Luxembourg, Netherlands, Norway, Portugal, Saudi Arabia, Spain, Sudan, Sweden, Turkey, Yugoslavia IBM Network Station...
1. The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use, and not for resale, from IBM or your reseller. The term ″Machine″ means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them.
If a Machine does not function as warranted during the warranty period, and IBM or your reseller are unable to either 1) make it do so or 2) replace it with one that is at least functionally equivalent, you may return it to your place of purchase and your money will be refunded.
Machine and 2) at an engineering-change level compatible with the feature, conversion, or upgrade. Many features, conversions, or upgrades involve the removal of parts and their return to IBM. A part that replaces a removed part will assume the warranty service status of the removed part.
IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in transit in those cases where IBM is responsible for the transportation charges. Neither IBM nor your reseller is responsible for any of your confidential, proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason.
If a Machine does not function as warranted during the warranty period, and IBM or your reseller are unable to either 1) make it do so or 2) replace it with one that is at least functionally equivalent, you may return it to your place of purchase and your money will be refunded.
IBM is not responsible. The warranty is voided by removal or alteration of Machine or parts identification labels. THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IBM or your reseller of changes in a Machine’s location. IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in transit in those cases where IBM is responsible for the transportation charges.
IBM (including fundamental breach, negligence, misrepresentation, or other contract or tort claim), IBM is liable for no more than 1. damages for bodily injury (including death) and damage to real property and tangible personal property;...
Limitation of Liability: The following is added to this Section: Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974, IBM’s liability is limited to the repair or replacement of the goods or the supply of equivalent goods. Where that condition or warranty...
Page 34
EGYPT: Limitation of Liability: The following replaces item 2 in this Section: 2. as to any other actual direct damages, IBM’s liability will be limited to the total amount you paid for the Machine that is the subject of the claim.
Page 35
The following paragraphs are added to this Section: The minimum warranty period for Machines is six months. In case IBM or your reseller are unable to repair an IBM Machine, you can alternatively ask for a partial refund as far as justified by the reduced value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine and get your money refunded.
Page 36
Applicability of suppliers and resellers (unchanged). The following paragraph is added at the end of this Section: IBM’s entire liability and your sole remedy, whether in contract or in tort, in respect of any default shall be limited to damages.
The following item is added to this paragraph: 3. breach of IBM’s obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982.
Notices This information has been developed for products and services that are offered in the U.S.A. IBM may not offer the products, services, or features that are discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area.
Web sites. The materials at those Web sites are not part of the materials for this IBM product, and use of those Web sites is at your own risk. Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements, or other publicly available sources.
Contact an IBM account representative for more information. This IBM Network Station contains circuit boards with lead solder, as well as a lithium battery. Before you dispose of this unit, remove the circuit boards and lithium battery, and discard them according to local regulations or recycle them where facilities exist.
Page 42
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Proper cables and connectors are available from IBM authorized dealers. IBM is not responsible for any radio or television interference caused by using other than recommended cables or connectors or by unauthorized changes or modifications to this equipment.
Page 43
75G5958 or its equivalent) must be used in order to reduce the potential for causing interference to radio and TV communications and to other electrical or electronic equipment. Such cables and connectors are available from IBM authorized dealers. IBM cannot accept responsibility for an interference caused by using other than recommended cables and connectors.
Thank you for your responses. May we contact you? h Yes h No When you send comments to IBM, you grant IBM a nonexclusive right to use or distribute your comments in any way it believes appropriate without incurring any obligation to you. Name...
Page 46
IF MAILED IN THE UNITED STATES BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO. 40 ARMONK, NEW YORK POSTAGE WILL BE PAID BY ADDRESSEE IBM CORPORATION ATTN DEPT 542 IDCLERK 3605 Highway 52 N ROCHESTER MN 55901-7829 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _...
Page 48
Part Number: 03N3503 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber. SA41-0046-01...