Table of Contents
Advertisement
|
|
|
|
Creating the repository
122
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide
The Repository meta data storage requirements dialog displays with a list of
file system arrangement options.
Figure 42. Repository meta data storage requirements screen
8. To print the information in the Repository meta data storage requirements
dialog, or to save the information as a .csv file, click Options.
9. Click Ok.
The Repository meta data storage requirements dialog closes.
Using the information provided by the Repository meta data storage
requirements dialog, choose the meta data file system arrangement that is
most appropriate.
For example, if the projected repository size is 15 TB, but the file system
arrangement for 16 TB more closely matches the logical disk arrangement of
your disk array, it is recommended that you choose 16 TB instead of the
original, smaller planned value.
10. Go to "Creating the repository."
About this task
After the necessary file systems have been created, use the information generated
during the repository planning process to create the repository. A repository can
only be created on a one-node cluster.
Note: Creating a repository is a prerequisite for adding a second node to a cluster,
as repository creation must be performed on Node A.
Advertisement
Table of Contents
