Table of Contents
Advertisement
Figure 48. Alerts Log
10. If the test succeeds on both nodes, TS7650G installation and setup is complete.
11. If the test fails on either node, contact your next level of support to resolve the
140
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide
occur. To do so, on the ProtecTIER Manager workstation, click Alerts in the
lower right corner of the ProtecTIER Manager screen. The Alerts Log opens.
See Figure 48.
When you are finished reviewing alerts, click Clear Alerts in the lower-right
corner of the Alerts Log screen.
Turn the system over to the customer and refer them to the IBM System
Storage ProtecTIER User's Guide for Enterprise Edition and Appliance Edition, IBM
form number GC53–1156 for information on customizing, using, and
maintaining ProtecTIER; and creating, configuring, and managing replication
grids, if applicable.
failure conditions.
You will need the customer number when contacting software support. To
avoid entitlement delays, have the customer number available before initiating
the call.
Advertisement
Table of Contents
