YASKAWA Z1000U Series Quick Start Manual page 47

No. Name
Function Key 2
9
(F2)
<1> Displayed when in Frequency Reference Mode.
<2> Displayed when in Frequency Reference Mode and Monitor Mode.
u
AUTO LED and HAND LED Indications
AUTO LED
AUTO
Off
AUTO
Off
AUTO
Off
AUTO
On solid
AUTO
Long blink (50% duty)
AUTO
Short blink (15% duty)
AUTO
Double blink
YASKAWA ELECTRIC TOEP C710636 11E Z1000U HVAC MATRIX Drive Quick Start Guide
Display
FWD/REV Pressing
DATA
Pressing
→
Pressing
RESET
Pressing
Monitor
Pressing
DRV/BYP The multi-function relay selected Drive/Bypass contact will be toggled.
RUNBYP The multi-function relay selected to RUN Bypass will be toggled.
RLY The multi-function relay selected to Relay operator control will be toggled.
Table i.25 AUTO LED and HAND LED Indications
HAND LED
HAND OFF mode
Off
HAND mode
HAND
On solid
HAND mode when the Frequency Reference is 0 and/or decelerating in HAND mode.
HAND
Long blink (50% duty)
HAND Running in AUTO mode
Off
Running in AUTO mode when the Frequency Reference is 0 and/or decelerating in AUTO
HAND
mode.
Off
AUTO mode, Ready, No run command input.
HAND
Off
HAND AUTO mode, stopped by a Fast- Stop from a Multi-Function Digital Input.
Off
i.5 Start-Up Programming and Operation
F2
switches between forward and reverse.
F2
scrolls to the next display.
F2
scrolls the cursor to the right.
F2
resets the existing drive fault error.
F2
switches Monitor mode.
Content
State
47