YASKAWA Z1000U Series Quick Start Manual page 82

i.9 Standards Compliance
Three-Phase 200 V / 400 V Class
A – Ground the cable shield
B – Enclosure panel
C – Metal plate
D – Grounding surface (remove any
E – Drive
Figure i.60 Internal EMC Filter and Drive Installation for CE Compliance (Three-Phase 200 V / 400 V Class)
u
UL Standards Compliance
The UL/cUL mark applies to products in the United States and Canada. It indicates that UL has performed product testing and
evaluation, and determined that their stringent standards for product safety have been met. For a product to receive UL
certification, all components inside that product must also receive UL certification.
This drive is tested in accordance with UL standard UL508C and complies with UL requirements. The conditions described
below must be met to maintain compliance when using this drive in combination with other equipment:
n Conditions of Acceptability
Install the drive and peripherals in a suitable enclosure for end use.
82
D
PE
L3
L2
L1
paint or sealant)
Figure i.61 UL/cUL Mark
D
Drive
H
I
F
A
G
F – Motor cable (braided shield cable,
max. 10 m)
G – Motor
H – Cable clamp
I – Ground plate (scrape off any
visible paint)
YASKAWA ELECTRIC TOEP C710636 11E Z1000U HVAC MATRIX Drive Quick Start Guide
B
C
E
D
A