Newland NLS-NVH200 User Manual page 133

Check Character Verification
Check characters are optional for Code 93 and can be added as the last two characters, which are calculated values used to verify
the integrity of the data.

Disable: The scanner transmits Code 93 barcodes as is.

Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Code 93 barcodes to verify that the
data complies with the check character algorithm. Barcodes passing the checks will be transmitted except the last two digits,
whereas those failing them will not be transmitted.

Transmit Check Character After Verification: The scanner checks the integrity of all Code 93 barcodes to verify that the data
complies with the check character algorithm. Barcodes passing the checks will be transmitted, whereas those failing them will
not be transmitted.

Disable

Transmit Check Character After Verification
119 **Exit Setup
If the Do Not Transmit Check Character After Verification option is enabled, Code 93 barcodes with a length
that is less than the configured minimum length after having the two check characters excluded will not be
decoded.
For example, when the Do Not Transmit Check Character After Verification option is enabled and the
minimum length is set to 4, Code 93 barcodes with a total length of 4 characters including the two check
characters cannot be read.
**  Do Not Transmit Check Character After
Enter Setup
Verification