Newland NLS-NVH200 User Manual page 138

Enter Setup
Set Length Range for UCC/EAN‐128
The scanner can be configured to only decode UCC/EAN‐128 barcodes with lengths that fall between (inclusive) the minimum and
maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 1)
**【Exit Setup】 124
If minimum length is set to be greater than maximum length, the scanner only decodes UCC/EAN‐128
barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only
UCC/EAN‐128 barcodes with that length are to be decoded.
Set the scanner to decode UCC/EAN‐128 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode "8" from the "Digit Barcodes" section in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcodes "1" and "2" from the "Digit Barcodes" section in Appendix.
7. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
8. Scan the Exit Setup barcode.
Set the Maximum Length (Default: 48)