Newland NLS-NVH200 User Manual page 189

Set Length Range for Chinese Sensible Code
Chinese sensible Code barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you
need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 1)
175 **Exit Setup
Minimum length is not allowed to be greater than maximum length. If you only want to read Chinese
Sensible Code barcodes with a specific length, set both minimum and maximum lengths to be that desired
length.
Set the scanner to decode Chinese Sensible Code barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode "8" from the "Digit Barcodes" section in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcodes "1" and "2" from the "Digit Barcodes" section in Appendix.
7. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
8. Scan the Exit Setup barcode."
Set the Maximum Length (Default: 7827)
Enter Setup