Note: This setting will be lost by removing power from the scanner, or turning off/ rebooting the device.
Single Scan Data Format 0
Single Scan Data Format 2
Non‐Match Error Beep
If Non‐Match Error Beep is turned ON, the scanner generates an error beep when a barcode is encountered that does not match
your required data format.
Off
Query Data Formats
Query Current Data Formats
Get the current configuration data format 0 to the configuration content of data format 3.
Query Preset Data Formats
Get the configuration data from factory configuration 0 to data format 3.
191 **Exit Setup
Enter Setup
Single Scan Data Format 1
Single Scan Data Format 3
** On