Enter Setup
Transmission Delay (Batch Mode)
** Off
Medium
Custom(Range 0 ‐ 10000ms)
Set the Transmission Delay (Batch Mode) time out as 200ms:
1. Scan the Enter Setup barcode.
2. Scan the Custom (Range 0 ‐ 10000ms)barcode.
3. Scan the numeric barcodes "2" "0" and "0" from the "Digit Barcodes" section in
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Exit Setup barcode.
**【Exit Setup】
Appendix.
Short
Long
42