Enter Setup
Custom Suffix
If you have enabled the Custom Prefix, you are allowed to append to the data a user‐defined prefix.
For example, if the custom prefix is "AB" and the barcode data is "123", the Host will receive "123AB".
** Disable Custom Suffix
Modify Custom Suffix
To set a custom suffix, scan the Set Custom Suffix barcode then the numeric barcodes corresponding to the hexadecimal value of a
desired suffix then the Save barcode. It is noted that a custom suffix cannot exceed 10 characters.
**【Exit Setup】 212
Set the custom Suffix to "CODE" (HEX: 0x43/0x4F/0x44/0x45):
1. Scan the Enter Setup barcode.
2. Scan the Modify Custom Suffix barcode.
3. Scan the numeric barcodes "4", "3", "4", "F", "4", "4", "4" and "5" from the "Digit Barcodes" section
in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Enable Custom Prefix barcode.
6. Scan the Exit Setup barcode.
Modify Custom Suffix
Enable Custom Suffix