Enter Setup
Code ID Prefix
In addition to the AIM prefix that can be used to identify different bar code types, users can also use the Code ID prefix to identify
the bar code type. Unlike the AIM prefix, the Code ID prefix corresponding to each bar type can be customized. The code ID of all
barcodes is one or two characters and must be alphabetic, not numeric, invisible, or punctuated.
** Disable Code ID Prefix
Restored Code ID Defaults
Modify Code ID
See the examples below to learn how to modify a Code ID and restore the default Code IDs of all symbologies.
**【Exit Setup】 206
Modify PDF417 Code ID to be "p" (HEX: 0x70):
1. Scan the Enter Setup barcode.
2. Scan the Modify PDF417 Code ID barcode.
3. Scan the numeric barcodes "7" and "0" from the "Digit Barcodes" section in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Exit Setup barcode
Restore the default Code IDs of all symbologies:
1. Scan the Enter Setup barcode.
2. Scan the Restore All Default Code IDs barcode.
3. Scan the Exit Setup barcode.
Restored Code ID Defaults
Enable Code ID Prefix