Newland NLS-NVH200 User Manual page 203

Delete Data Format
There are two methods to remove data format created from your scanner:
189 **Exit Setup
Program a Format_0 data format using formatter command type 6, Code 128 containing 10 characters
applicable, send all characters followed by "A".
1. Scan the Enter Setup barcode
2. Scan the Add Data Format barcode
3. Scan the 0 barcode
4. Scan the 6 barcode
5. Scan the 9 barcode three times
6. Scan the barcodes 002
7. Scan the barcodes 0010
8. Scan the alphanumeric barcodes F141
9. Scan the Save barcode
Enter Setup