Enter Setup
Enable/Disable Data Formatter
Disable Data Formatter:
Disable the date formatter function.
Enable Data Formatter, Required, Keep Prefix/Suffix:
Scanned data that meets your data format requirements is modified accordingly and gets outputted along with prefixes and
suffixes (if prefix and suffix are enabled). Any data that does not match your data format requirements generates an error beep
(if Non‐Match Error Beep is turned ON) and the data in that barcode is not transmitted.
Enable Data Formatter, Required, Drop Prefix/Suffix:
Scanned data that meets your data format requirements is modified accordingly and gets outputted without prefixes and
suffixes (even if prefix and suffix are enabled). Any data that does not match your data format requirements generates an error
beep (if Non‐Match Error Beep is turned ON) and the data in that barcode is not transmitted.
Enable Data Formatter, Not Required, Keep Prefix/Suffix:
Scanned data that meets your data format requirements is modified accordingly and gets outputted along with prefixes and
suffixes (if prefix and suffix are enabled). Barcode data that does not match your data format requirements is transmitted as
read along with prefixes and suffixes (if prefix and suffix are enabled).
Enable Data Formatter, Not Required, Drop Prefix/Suffix:
Scanned data that meets your data format requirements is modified accordingly and gets outputted without prefixes and
suffixes (even if prefix and suffix are enabled). Barcode data that does not match your data format requirements is transmitted
as read along with prefixes and suffixes (if prefix and suffix are enabled).。
**【Exit Setup】 186