Newland NLS-NVH200 User Manual page 163

Set Length Range for PDF417
。The scanner can be configured to only decode PDF417 barcodes with lengths that fall between (inclusive) the minimum and
maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 1)
149 **Exit Setup
The maximum length limit of any two‐dimensional bar code shall not exceed 65535 bytes, and the maximum
length limit shall not be less than the minimum length limit.
If you want to read only a fixed length PDF417 bar code, you can set the minimum length limit to be equal to
the maximum length limit.
Set the scanner to decode PDF417 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode "8" from the "Digit Barcodes" section in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcodes "1" and "2" from the "Digit Barcodes" section in Appendix.
7. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
8. Scan the Exit Setup barcode.
Set the Maximum Length (Default: 2710)
Enter Setup