Enter Setup
Introduction
After decoding, the scanner gets a string of data, which can be numbers, English, symbols and so on. For
two‐dimensional codes, it can also be Chinese characters. This string of data is the data information contained in
the bar code. In practice, we may not only need the data information of barcode, or the data information
contained in barcode can't meet your needs. If you want to know which type of bar code the data comes from, or
when the bar code information was scanned, or if you want to scan a bar code, the text of the record bar code
can be wrapped back automatically, which may not be included in the bar code data information.
It is not advocated to increase the length and flexibility of the bar code by adding these contents. At this point,
we think that the bar code data information before or after the addition of some content, and these additional
content, according to real‐time changes in demand, can choose to add or shield, this is the bar code data
information prefix, prefix and suffix method, that is to meet the needs without modifying the bar code The
content of information.
**【Exit Setup】 202
Chapter 8 Prefix & Suffix Settings
Barcode processing procedure:
1. Edit data with Data Formatter
2. Append prefix/suffix
3. Pack data
4. Append terminating character: