2. Commissioning
2.4
Object directories
2.4.1 Communication profile
2−20
The following tables show the objects of the communication
part (values and examples: module ID = 1).
In the following:
U
ro
rw
Map. = mapping possible
Attr. = attribute
Note
For mapping the rules as per CiA DS301 apply: Mapping
entries are only possible if the number of parameters has
previously been set to zero.
(Example: index 1A00, subindex 3
Set subindex 0 to 0").
After entering the mapping values, set the number of
parameters to the appropriate value again.
= unsigned
= read only
= read/write
8:
Festo P.BE−CPX−FB14−E N en 0810b